 | |  | |  | |  | |  | |  | |  |
| In 2008 Watch the Website for Winner Photos Each Week, Recap of Each Weeks Racing, Fast Points Updates, Special Event Information For Shelby County Speedway and lots more ......... Come Celebrate With Us 17 Years of Continuous Racing!!! |
| 2008 Divisions Crate Late Models, Thunder and Lightning, Hobby Pure Stock, Pony's, Buzz Car and Road Hogg |
| Tear Down Rule |
DISCLAIMER
The rules and or regulations set forth herein are designed to provide for the orderly conduct of racing events, to establish minimum
acceptable requirements for such events. These rules shall govern the condition of all events, and by participating in these events.
No express or implied warranty of safety shall result from publication of or compliance with these rules or regulations. They are
intended as a guide for the conduct of the sport and are in no way a guarantee against injury or death to a participant, spectator, or
official.
Tear Down Rule
1. To pull valve cover and check cam lift- $50.00 with $ 25.00 going to track.
2. To pull intake and check lifter- $200.00 with $50.00 going to track.
3. To pull intake and check for port work - $200.00 with $50.00 going to track. If intake already off as if during
a lifter check add only $25.00 to go to track.
4. To pull head and check piston to deck clearance and valve size - $300.00 with $75.00 going to track. Add $50.00
to check compression ratio. Add $25.00 to check bore and stroke.
5. To pull rod and inspect - $350.00 with $100.00 going to track.
The rules and or regulations set forth herein are designed to provide for the orderly conduct of racing events, to establish minimum
acceptable requirements for such events. These rules shall govern the condition of all events, and by participating in these events.
No express or implied warranty of safety shall result from publication of or compliance with these rules or regulations. They are
intended as a guide for the conduct of the sport and are in no way a guarantee against injury or death to a participant, spectator, or
official.
Tear Down Rule
1. To pull valve cover and check cam lift- $50.00 with $ 25.00 going to track.
2. To pull intake and check lifter- $200.00 with $50.00 going to track.
3. To pull intake and check for port work - $200.00 with $50.00 going to track. If intake already off as if during
a lifter check add only $25.00 to go to track.
4. To pull head and check piston to deck clearance and valve size - $300.00 with $75.00 going to track. Add $50.00
to check compression ratio. Add $25.00 to check bore and stroke.
5. To pull rod and inspect - $350.00 with $100.00 going to track.